Asteroid Discovered With Three Moons!

Asteroid Discovered With Three Moons!


ग्रह ही चंद्रमा के साथ एकमात्र खगोलीय पिंड नहीं हैं - क्षुद्रग्रह उनके पास भी हो सकते हैं। वे आम तौर पर अन्य, छोटे क्षुद्रग्रह होते हैं जो एक बड़े केंद्रीय एक के चारों ओर कक्षा में होते हैं। अब, थाई और फ्रांसीसी खगोलविदों की एक टीम ने तीन उपग्रहों के साथ एक क्षुद्रग्रह प्रणाली की खोज की। नया फोर-बॉडी सिस्टम जटिल गुरुत्वाकर्षण समस्याओं को बनाता है जैसे कि थ्री-बॉडी प्रॉब्लम तुलनात्मक रूप से सरल दिखती है।

छोटा तारा इतने सारे हैंगर-ऑन के साथ जाना जाता है (130) इलेक्ट्रा। ईसाई पीटर्स द्वारा पहली बार 1873 में पाया गया, इसका व्यास लगभग 200 किमी था और इसका वजन लगभग 7 x 10^18 किलोग्राम था। यह एस/2003 (130) 1, एस/2014 (130) 1, और एस/2014 (130) 2 के नाम से जाने जाने वाले तीन छोटे क्षुद्रग्रहों को पकड़ने के लिए पर्याप्त द्रव्यमान से अधिक है - सबसे हालिया खोज केवल एक पेपर में विस्तृत थी 10 फरवरी को arXiv पर प्रकाशित हुआ।

(130) इलेक्ट्रा की छवि क्षुद्रग्रह के “प्रभामंडल” के साथ हटा दी गई। क्रेडिट: बर्देउ एट अल।

उनके पदनाम उस वर्ष को दर्शाते हैं जिस वर्ष उन्हें पहली बार देखा गया था, जो दर्शाता है कि S/2014(130) 2 सात वर्षों से अधिक समय तक एक डेटासेट में बिना देखे बैठा रहा। उस डेटासेट को स्पेक्ट्रो-पोलारिमेट्रिक हाई-कॉन्ट्रास्ट एक्सोप्लैनेट रीसर्च फैसिलिटी (SPHERE) द्वारा एकत्र किया गया था, जो कि एक अवलोकन मंच है।[{” attribute=””>Very Large Telescope (VLT). The telescope turned its attention to (130) Elektra back in 2014. Over that time, the dataset captured S/2014 (130) 2 one hundred and twenty different times over 22 days. So why was it so hard to find?

Elektra Moon Orbits

Projected orbits of Elektra’s three moons. Credit: Berdeu et al.

There are two answers to that question. First, the total amount of data has to be reduced. Second, even when the data was reduced, the signal for the moon itself was hidden in the larger asteroid’s “halo.” Dr. Anthony Berdeu and his team developed novel algorithms for both that allowed them to tease out the previously indiscernible moon.

Potential Moon Around Elektra 2019

Another potential detection of the moon around Elektra in a different data set – this one was collected in 2019. Credit: Berdeu et al.

Reducing the amount of data while analyzing it might seem counter-intuitive, but data reduction pipelines are commonplace in spectrography. This is mainly because data sets have optical artifacts derived from other spectra that aren’t necessarily of interest to certain studies. To eliminate these artifacts, Dr. Berdeu and his team utilized a novel data reduction technique for the SPHERE instrument called Projection, Interpolation, Convolution (PIC) and published in a separate paper back in 2020. With this tool, they could eliminate enough spectral artifacts to get a clearer picture of their intended target.

That target was still surrounded by a “halo,” which is another type of spectral artifact that made the asteroid’s surface appear to glow. It also reached far enough out from the asteroid’s surface to engulf S/2014(130) 2, which has a semi-major axis of only 344 kilometers from Elektra’s surface.


चंद्रमा कहीं भी हो सकता है जैसा कि इस UT वीडियो में चर्चा की गई है।

इसलिए शोधकर्ताओं ने एक और सिग्नल प्रोसेसिंग एल्गोरिथम विकसित किया, जिसने प्रभामंडल के भौतिकी को मॉडल करने का प्रयास किया, और फिर लक्ष्य की किसी भी कैप्चर की गई छवि से उन मॉडल किए गए प्रकाश स्तरों को हटा दिया। पॉइंट स्प्रेड फंक्शन (पीएसएफ) के रूप में जाने जाने वाले एल्गोरिदम का उपयोग करते हुए, वैज्ञानिक एलेक्ट्रा के सबसे छोटे और सबसे निकट से परिक्रमा करने वाले उपग्रह का खुलासा करते हुए, क्षुद्रग्रह से प्रभामंडल के प्रभाव को सफलतापूर्वक हटाने में सक्षम थे।

खुशी की बात यह है कि इस डेटा में कमी और प्रभामंडल उन्मूलन तकनीक का उपयोग अन्य क्षुद्रग्रह अवलोकनों पर भी किया जा सकता है और डेटा एकत्र किए जाने के बाद इसका अच्छी तरह से उपयोग किया जा सकता है, जैसा कि डेटा विश्लेषण में सात साल के अंतराल से पता चलता है। तो क्षुद्रग्रह बेल्ट में बहुत अधिक बहु-शरीर क्षुद्रग्रह प्रणाली हो सकती है जो चार-शरीर की समस्या के कक्षीय यांत्रिकी को केक के टुकड़े की तरह दिखती है।

मूल रूप से पर प्रकाशित ब्रह्मांड आज.

(function(d, s, id){
var js, fjs = d.getElementsByTagName(s)[0];
if (d.getElementById(id)) return;
js = d.createElement(s); js.id = id;
js.src = “//connect.facebook.net/en_US/sdk.js#xfbml=1&version=v2.6”;
fjs.parentNode.insertBefore(js, fjs);
}(document, ‘script’, ‘facebook-jssdk’));



Source link

%d bloggers like this: